IMPORTANT: Read all instructions carefully before operating Baby Wipes Warmer.

OPERATION: Plug the unit into a 110 - 120V circuit. The power indicator light will be on when functioning properly and the unit will begin warming.

STANDARD WIPES: Remove wipes from original packaging, lift the lid and drop in a stack of baby wipes (approximately 80-100 or enough to allow the lid to completely close). Allow three hours to reach full temperature.

POP-UP WIPES: Remove wipes from original packaging, lift the lid and drop in a stack of baby wipes (approximately 80-100 or enough to allow the lid to completely close). For proper dispensing, remember to place wipes correct side up as noted on wipes packaging.
USING ON DIAPER DEPOT (Sold separately): Simply align and attach the unit so that the two Front Lock Slots on bottom secure onto the front edge of the Diaper Depot (this will also align the Rear Lock Slot).

CLEANING: Unplug from the power source and use a non-abrasive wipe to clean tub periodically. Do not immerse unit in water or other liquid.

EVER FRESH SYSTEM
FIRST USE: Insert EVER-FRESH into the Wipes Warmer’s tub. Thoroughly saturate
Ever-Fresh with distilled or bottled water. Fill Warmer with your favorite wipes. Allow wipes to warm a few hours before first use.

MAINTENANCE: Check EVER-FRESH's moisture by pressing with your fingers. It
should be soft and moist. Add water as necessary. Do not allow Ever-Fresh to dry out. Wash and rinse Ever-Fresh thoroughly at least once every two weeks. You may include it with your laundry, hot or warm water, no bleach.

REPLACEMENT: For best results, replace EVER-FRESH every three months.
EVER-FRESHTM replacements are available from your retailer or contact PRINCE LIONHEART at www.princelionheart.com or (800) 544-1132.

NOTE: While EVER-FRESH prevents your wipes from discoloring, EVER-FRESH
may discolor slightly over time if not kept moist. Discoloration is harmless and rinsed out easily.

CONDENSATION: The lid has been designed to open only to a vertical position in order to recycle condensed moisture
back into the tub. Be sure to wipe up occasional drips and keep lid tightly closed when not in use.
CONTINUOUS USE: The Baby Wipes Warmer is designed for continuous use. However, to preserve wipes and conserve energy, unplug unit if it will not be used for prolonged periods of time (several days).

POP-UP LID ADJUSTMENT: The pop-up release action is adjustable. If the factory setting for the Release Button is difficult, gently flex the Lock Tab “back” as shown for easier operation. If the Pop-Up lid does not lock properly, gently flex Lock Tab “forward” as shown.

CAUTION

IMPORTANT: Because of the sustained low levels of heat and moisture associated with the Baby Wipes Warmer, use caution in placing the unit on a compatible surface. Prince Lionheart makes no warranty, either expressed or implied, that surface discoloration or damage may not occur due to heat or moisture.

NORMAL USE: Do not use Baby Wipes Warmer for other than intended use.
SAFETY: Always use Baby Wipes Warmer on a stable flat surface and locate cord to prevent accidental tipping or spilling. To protect against electrical shock, do not immerse cord, plug, or Baby Wipes Warmer in water or other liquid. Keep this and other appliances out of reach of children.

WARRANTY

WARRANTY COVERAGE: Each Prince Lionheart Baby Wipes Warmer is guaranteed to be free from manufacturing and material defects for a period of one year from the date of purchase. SAVE YOUR ORIGINAL RECEIPT TO VALIDATE START OF WARRANTY PERIOD.
SERVICE: If this Baby Wipes Warmer, its adaptor or cord becomes damaged or malfunctions, do not continue to use it or attempt to
repair it. Return the appliance to Prince Lionheart postage paid, for examination, repair, or replacement.
LIMITATIONS: Use of your Baby Wipes Warmer for any purpose other than warming hygienic baby wipes is considered misuse. Prince Lionheart’s warranty does not cover loss or damage caused by misuse, neglect, disassembly, or improper care. This warranty is in addition to and does not affect your legal statutory rights. Customer satisfaction can only be achieved by knowing and understanding customer concerns. Please direct all customer enquiries and warranty claims to our mailing address or email (above). Outbound warranty shipments from Prince Lionheart will be returned as directed, and will be prepaid as a service to our customers.